Game Roy Advance Keyboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Game Roy Advance split keyboard that works with the included screws.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 1405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a simple case for the both halves of the Game Roy ADVANCE keyboard.
This case is meant to be used without the bottom plate and works with the included screws. I have included 2 sets of files:
- Has a thinner bottom, which means the reset switch sticks out by 1mm. I used rubber feet to raise the case up as well as give it traction (which I highly recommend). The feet give enough height that you won't accidentally press the button
- Has a thicker bottom such that the reset button is recessed. Screw holes are also recessed so you can still use the included ones without having to use rubber feet. I haven't printed this one out, so let me know if there's anything off about it
I printed with PETG at 25% infill, but you can increase or decrease the infill percent as you like. I recommend a 0.2 layer height.
To assemble, simply remove the bottom FR4 plate from the keyboard, place the board in the case, and screw in the screws from the bottom into the standoffs.
I have also included the Fusion 360 file if you would like to make your own edits.