Splash guard for mist maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a splash guard – an additional part for @ulitiy's nice floater for the ultrasonic mist maker.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 1649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a splash guard – an additional part for @ulitiy's nice floater for the ultrasonic mist maker. His floater is not included; you have to download it here:
https://www.thingiverse.com/thing:3900020
… or you can download this remix:
https://www.prusaprinters.org/prints/20579
The splash guard is very lightweight (approx. 17 grams) and it is a tight fit. However, the legs bend easily, and you can adjust the distance to the floater quite a bit.
OpenSCAD source files are included.
Print instructions
I printed this with PETG on the textured PEI sheet, and used “Archimedean Chords” as the bottom infill pattern. I have not tried it yet, but a translucent material should look nice too. :)