1 / 2
Filament Guide in a balanced way - Grippy Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Like the original but grippier
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
Like the original but with a grippier ‘foot’ as I found that the original had a tendency for the bottom to pop off. Depending on shrinkage you might have to print at 101%.
Additional parts required:
- 1 x 625ZZ Bearing 5mm x 16mm x 5mm
- 1 x M5 x 30mm bolt
- 2 x 5mm nut (ideally with nylon lock)
- 2 x 5mm washer
- PTFE tube
*Nore - Updated R2 with 1mm of extra grip ;-)