1 / 2
Filament Guide in a balanced way - Grippy Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Like the original but grippier
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Like the original but with a grippier ‘foot’ as I found that the original had a tendency for the bottom to pop off. Depending on shrinkage you might have to print at 101%.
Additional parts required:
- 1 x 625ZZ Bearing 5mm x 16mm x 5mm
- 1 x M5 x 30mm bolt
- 2 x 5mm nut (ideally with nylon lock)
- 2 x 5mm washer
- PTFE tube
*Nore - Updated R2 with 1mm of extra grip ;-)