Recycle Token - Great for gaming and contests that require tokens or chips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gaming token with recycle symbol on both sides. Uses .4 meters per token @ 1.75mm/0.4mm
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG.
This print is useful for consuming the end of a roll that is too little to make another proper print. Estimate how many meters of filament you have left. The provided gcode file will print 3 coins and consume 1.2 meters of material. The STL file for the recycle token will let you re-slice and plan on 0.4 meters of material per coin - so that is 5 coins from only 2 meters of material.
Slicing Instructions: No supports, No infill. Play around with top layer infill for interesting effects.
Printing instructions: 3 of them print in 18 minutes. Plan on 6 minutes per coin.