Recycle Token - Great for gaming and contests that require tokens or chips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gaming token with recycle symbol on both sides. Uses .4 meters per token @ 1.75mm/0.4mm
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG.
This print is useful for consuming the end of a roll that is too little to make another proper print. Estimate how many meters of filament you have left. The provided gcode file will print 3 coins and consume 1.2 meters of material. The STL file for the recycle token will let you re-slice and plan on 0.4 meters of material per coin - so that is 5 coins from only 2 meters of material.
Slicing Instructions: No supports, No infill. Play around with top layer infill for interesting effects.
Printing instructions: 3 of them print in 18 minutes. Plan on 6 minutes per coin.