OnTable Boom Arm Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is exactly what the title says! :D Basically a boom arm mount that screws on top of the table.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 1077
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Heyooo, so first model, kinda excited ngl!
So there's nothing too complicated about it. All you need is:
- M5 Bold
- M5 Nut
- 4 x 4mm Wood Screws
There are two holders, one of them has a hole inside the model so you can pause the print and slide in a M5 Nut, the other has a slit from the bottom so you can slide the nut all the way without having to pause the print.
The idea of the sleeve is so you don't scuff up the boom arm shaft with when applying pressure with the screw and rotating. (I also kinda messed up the first time because the hole was too big so that's why I made a sleeve but now its a feature!).
If you like it, like it! If you don't and have some suggestions for improvements, let me know. Or just remix it yourself I left the Fusion file for download.
Also print it a bit toasty so it has good layer adhesion.