1 / 2
Wall Drybox Lid w/ Swatch and QR Holder — zdjęcie 1
1 / 2

Wall Drybox Lid w/ Swatch and QR Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjusted version of the lid for the wall-mounted Drybox.

Ocena
5 / 5
Polubienia
7
Pobrania
76
Wydruki
1
Wyświetlenia
922
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to wall-mount by dryboxes for storage, so created an adjusted version of the lid to show the sample swatch on the same face as the sensor, which is more visible on the wall.

I recommend printing with supports for the corners of the holders to make them cleaner - but I'm obsessive like that.

Designed to fit the same sample swatches as the original lid, available here. I've also added swatches, as STLs and GCODE (with temperature changes) for the filaments I have. I may add more as I go.

Main lid includes both the swatch holder and a holder for the QR codes which come from Spool Manager. QR Code should be 31.75mm (1.25") with a margin of 33.25mm.

I've also included separate files to use to print holders to add to existing lids you may have - I did, and didn't want to reprint the whole things just to add holders. Use the included spacers to get them in the right spot. No fancy glue needed, I just used clear school glue and that's plenty strong.

 

 

Tagi