1 / 2
Simple Phone Charging Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stand holds your phone high enough for a charging cable and even fits bulky cases
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 292
- Wydruki
- 1
- Wyświetlenia
- 925
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (26)Powiązane
Printing:
Doesn't need anything too special with the usual supports though I do suggest different infill settings in some areas
Infill:
- The areas highlighted by the purple boxes should have a higher infill density (45% ish but I turned down the infill density for the rest of the model down to 15%)
- I also found that the bend from the where the phone itself would be to the back (furthest bend in the image) could benefit from a higher infill density
- (The area covered by the smaller purple box might not need the extra density)
Support:
- Places where support should be are marked in blue on the infill image
- (You might want to put more support on the farthest back area)
Support Settings:
- These are the support settings that I found to be the most convenient but main suggestions are to increase the spacings on the support
- (I also didn't come up with this but I forgot exactly where these settings came from)