1 / 2
Dust Hose Adapter 60mm (hose) to 35mm (vacuum) — zdjęcie 1
1 / 2

Dust Hose Adapter 60mm (hose) to 35mm (vacuum)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Hose adapter for a 60mm hose to a 35mm vacuum connection.

Ocena
0 / 5
Polubienia
7
Pobrania
78
Wydruki
0
Wyświetlenia
655
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

This is a Hose adapter for a 60mm hose to a 35mm vacuum connection.
Younger brother is making a dust collector/extractor unit and asked if I could design a adapter for him to be able to facilitate the hose to vacuum adapter variance. He gave me the wrong dimensions, so I have made this one which works for his setup (he told me hose was 50mm but it's actually 60mm).

 

I have printed this once so far. I printed vertical which resulted in supports across the entirety of the hose end thread which took a while to remove. Just like my 50mm to 35mm design.

 

Pictures are indicative only, These are the pictures from my small adapter, this design has a larger variance between the hose and vacuum ends.

Tagi