NTAG215 NFC Case (Print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been playing with home assistant and I needed a way to mark my NFC tags nicely. So this is what I came up with.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Firstly thanks for reading! So I needed a way to differentiate between NFC tags and I wanted something a little nicer than just writing on them. Now in the example below I've just added some simple lettering to make it easier as these are for my Lack Enclosure.
P for Printer
O for Octoprint
L for lights
These files are made for a 25mm plastic NFC tag, the print is paused mid way through, put the tag in and continue the print over the top. I ordered mine from Amazon
(NTAG215 NFC Round Cards NFC 215 Card Tag Compatible with TagMo and Amiibo, 504 Bytes Memory Fully Programmable for NFC-Enabled Devices (30 Pieces) : Amazon.co.uk: Stationery & Office Supplies)
I've included all the .stl files and I've also included a blank so you can add it into your favourite editor and add what you like to the top and because I can, I added the fusion file too, makes it a little easier right?
Settings I used to print:
PETG
0.10mm Detail
100% infill
Paused at layer 22 for NFC tag
Colour Change at layer 33 if you're that way inclined.
My plan is to put some double sided tape on the back or glue to my enclosure!
Happy Printing!