Liczymy pasujące modele…
Print the model upright so the layer lines are vertical when mounted to the wall for best strength. I printed with PETG but you can probably get away with PLA as the model isn't very heavy.
FV215b tank Print Settings Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Category: Vehicles
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
F3Z and STEP files
Con este modelo de torre de temperatura podrás realizar los cambios de temperatura de una manera fácil e intuitiva, ya que está diseñada para realizarlos cada 50 capas de impresión. Utilizando el comando M104 S…. ¡Y la temperatura a la…
Simple wall mount for the LEGO Bugatti Bolide (Set #42151 and #42162) to be able to hang the completed model in a vertical orientation. The pegs slide into the open area in the floor just in front of the rear diffuser, and are angled at…
Waveshare's ST3215 digital servo has a fairly complex and odd body shape. This model contains a mount that snugly fits the servo's body. The mount has holes matching the eight mounting holes on the servo for use with the self-tapping…
Wieża temperatur dla ASA 230-270 i PETG 215-250
Use to mount the charger to a surface using screws
I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor…
This model is compatible with the lego system.
Layer height - 0.12-0.16, 3 perimeters Высота слоя - 0,12-0,16, 3 периметра.
Diseño del enganche de la maleta de herramientas Mannesmann 215, la parte de la pinza.
I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.
A remix of the Bosch 12v charger wall mount BC330 model by dhorst on Thingiverse. This is a wall mount for the Bosch 18V battery charger (AL 2215 CV) that comes with the Bosch Cordless Combi Drill PSB 1800. Not a precise fit but gets the…
Es la bisagra que cierra el maletín de herramientas Mannesmann de 215 pzas.
Originally published here: (WIP) Motorola Moto E20 xt2155 case by tato_713 - Thingiverse This was designed for the Motorola E20, but it may be compatible with the E40 as well. Some of the models are designed for rigid materials and others…
I needed a way to hold multiple NFC Tags so I made this keyring. Fits 25mm NTAG215 NFC tags. The fit is snug for a pressure fit. Designed in Tinkercad. Tested in PLA.
Mercedes 215 CL class door switch panel mounting hooks. Often broken or missing, OEM part number A2157208948 currently marked as NLA. Modeled after the original one with some modifications to allow printing upright without supports.
Update 3/2/2021: Modified grip, seems to hold better now. Considering this 'complete' Replacement bracket for Milwaukee 2111-21 Headlamp (and similar), service part 42-36-0215 . This is not 100% accurate, I had to guess some dimensions of…
Bisagra para el cierre de la maleta de herramientas Mannesmann 215
Honeycomb storage wall with thicker outer walls for all printers with a print bed of at least 215x203mm.
Used to align and reinstall oil cooler on Porsche 944 with early OPRV. Warning: This tool has NOT been tested yet. Use it on your own risk. The tool is based on rough measurements found on Rennlist forums. Should fit though. Made this as…
A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…
I made some of these to hand out at various events this year. Some were keychains with URLs and others were used for video games. I included a blank that you can easily customize inside PrusaSlicer. Have fun! Please share your makes!…
Very simple model, I just made a series of boxes and slid them around until they matched my measured dimensions on the silverware. The Right-most area is left open at the top for longer items. There are a couple mm to spare on the sides,…
I had some NFC tags laying around, and i needed a way to store them. I found this https://www.printables.com/model/258431-rugged-box-parametric/comments which had a parametric file, so i edited it to hold 25 cards. I added a the Hylian…
Originally published here: Motorola Edge 20 Pro / S Pro xt2153 case by tato_713 - Thingiverse This case is for the Motorola Edge 20 Pro , for the regular Egde 20 see this case ; and for the Edge 20 Lite see this case . Thanks to Marcus…
A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…
Simple case for NTAG215 NFC sticker(dia 25mm type). Category: Video Games
Customized version of https://www.thingiverse.com/thing:1381839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1381839 Instructions Using the following options: machine = Ultimaker 2+ PLA temperature =…
Created to organize my Amiibo backups. Important note on the cap, increase / decrease the X and Y scaling for the cap by 0.5% until the print firmly snaps into place. This is an interference fit and every printer is different. You should…
Mounting frame for Waveshare ST3215 servo motor. I hope it will be useful to anyone involved in robotics, hobby, 3D printing. I suggest support only for the slots for the screw head, everything else works perfectly without support. The…
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
Mounting frame for Waveshare ST3215 servo motor. I hope it will be useful to anyone involved in robotics, hobby, 3D printing. I suggest support only for the slots for the screw head, everything else works perfectly without support. The…
This model is compatible with the lego system.
Wall mount for LEGO Ford GT 42154
knipex 9721215 crimping pliers hsw
with at layer heigt off 50 layers pr 5c(depends on layger height offcours) from 215 to 265 Category: 3D Printing Tests
I made this for when I am repairing/building small electronics. I couldn't find a model that worked for the Ender 3 plate. The same day that I printed off one in TPU my dad asked for one for when he is repairing watches. He wanted it to…
lego 4215 59349 23405 98280 30022 87421 47847 6082 64453 65735
Wall mount for LEGO Bugatti Bolid 42151
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
These are mini Marathon motor covers for the ⅓ scale XT22 by Nascarsimracing1, Its also compatible with the legacy 3T22, and other siren models that utilize the same mounting pattern. Feel free to save the image of the tag and glue it on…
Scatt adapter for sport pistols Hammerli 208/215. To be screwed under the counterweight that has to be tapped 2x M4x6. The distance between the 2 tapped holes M4 is 20mm.
the fv215b 183 is a concept tank developed by the British tank people which is an fv215b with a 183 millimeter cannon, therefore able to penetrate thick armor and deal massive amounts of damage. print with pla or anything takes an hour…
Remix to fit Diesella 10 215 150 I printed a case and forgot some clearances, but it should be fixed now.
you put the sticker in the recess of the coin and then press the lid on, you'll have to lay down the model in your slicer Print Settings Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: Hatchbox PLA Category: Video Games
Two PCT-215 (5 pins) holder with 3M threaded inserts.
J'ai modélisé ce support pour accrocher la Chevrolet Nascar LEGO #42153 au mur. Il suffit de visser le support au mur avec 2 vis m4 tête fraisée, puis de poser la voiture sur le support (voir photos). Imprimer en PLA, en 0.20 avec un…
A simple way to display a Lego Ford GT 42154 on a wall. We tried some other models that snapped and since we didn't want this car to end up on the floor in pieces, we beefed it up. We printed with PET-CF, a .8mm nozzle, .32mm layer…
Wall mount Lego Bugatti-Bolide 42151
Just a remix to the original one to fit my needs. You'll need a precisely calibrated printer. Tolerances are tight...
Thus is Hood Release Latch for Mercedes CL500 W215. This is very hard to find online for purchase, so I modelled it. Better print it using PETG to handle better outdoor temp or even ABS. I test printed it using PLA and PETG but not ABS.
zámek kastlíku na babettu 210/215/225
NTAG215 Case for 28 tags of 25mm diameter. Inner dimensions are d:25mm x h:28mm
Pièce de remplacement pour une poignée de verrouillage de verranda d'un ami référence au dos de la pièce d'origine : 723.2151
Fixation gopro pour frame drone FPV martian 215 Imprimé en TPU Remplissage 100%
Sovol SV05 - Power Supply Cover for Standard 215mm x 115mm x 50mm power supply I had trouble with my printer reaching 245 degrees so I replaced the power supply with a 480W. The original power supply is thinner than most that are readily…
Deets The chain slider on our beat up old XT225 finally gave up the ghost. Ive been wanting to fix it, but it gets ridden a lot. Thankfully the old one broke off so the swing arm didnt need pulled. This model omits the angle for the…
Got a lot of harddrives to carry around? Maybe because you work in computer service or in a datacenter? Then this frame insert for these cute 15 × 20 cm Euroboxes is here to make your life easier. (Particularly AUER EG21512) This model…
Replacement "shroud" for BB Gun - BB - CZ 75 D Compact - AZ215 - 600-L2 Part number: 600-L2 Print instructions Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.20 Infill: 100% Filament_brand: Creality PLA…
These adapters let the Easy Omniwheel mount onto a Feetech STS3215 servo, commonly used in the LeKiwi and HuggingFace SO-ARM100 arm. The EasyOmniWheel_to_FeeTech_Hub.stl is the easiest & quickest to print and seem to work okay on a LeKiwi…
Overview This custom-engineered servo horn is designed specifically for DS3215 servos. It features a 1:1 accurate fit to ensure perfect mechanical alignment. The standout feature is the integrated brass shaft support, which reinforces the…
Cutco Knife Knife Block add on for Steak Knives 2159 Lets you use 3M Command Strips (Large Velcro kind) to place your knives onto the back of many standard knife blocks.
Knipex 97 21 215 B 9" Crimping Pliers Gridfinity Bin 2x6. Not perfect but it works.
Important: In order to combine the lid and the body of the card holder, insert a straightened paperclip through the top holes. A device I made to assist in organizing my desk space while practicing some NFC215 'modification'. The case can…
This model is a remix of the horizontal mount for LEGO 42156, specifically adapted for the 42154 and 42151 models. The designs are oriented with the nose to the right, but you can invert the orientation by applying the mirror mode in your…
J'ai modélisé ce support pour accrocher la Bugatti LEGO #42151 au mur. Il suffit de visser le support au mur avec 2 vis m4 tête fraisée, puis de poser la voiture sur le support (voir photos). Imprimer en PLA, en 0.20 avec un remplissage à…
If you want to fill full of canister. You need: 1 x lower-spacer-ring 4 x canister-ring 4 x ring-botom-mesh 1 x top-mesh Only one part need support. I recommended use variable layer height to “canister ring” and “lower-spacer-ring”
I got a new Rigol ds1054z scope that came with Rigol PVP2150 probes (the smaller, all black kind), and I needed something to hold the probes in place on circuit boards. I had already printed this very nice probing station designed by…
This is a simple 3D-printed wall mount for the Anker Charge (A2154). It holds the charger at a 30° angle for better accessibility and organization. Features: 30° angle for convenience Easy to mount with screws Compact and functional…
Cutco Knife Co. Plastic Organizer for Steak Knives 2159 Tray to hold 4 (#2159) Steak Knives Protect your Cutco from dulling and damage that can occur when stored loose in drawers.
Storage cubby to replace the original ashtray. Pieces are split with ~0.25mm upholstery material in mind and designed to be glued together. Uses the same bulb for illumination as factory but needs a different housing (HELLA-9FF 713…
This mount plate can be used to attach your BenQ HT2150ST projector to the ceiling. To use it, you will need to also print the ceiling plate, swivel, and universal joint from hyperair's projector ceiling mount . See that project for more…
General This is a replacement for the rubber corner for the Land Rover Series and early Defender B- and C-Pillar (part number 33215). Commercial replacements are available but as you need 4 or 6 for each vehicle, printing can be cheaper.…
A placeable component for the Bumbag Customizable Enclosure System . Product page here . This model incorporates a modified version of the SKSM 3D model published by Schurter. Sellers: RS Components
Wall mount holder for the Ford GT 42154, with dimensions 72 mm / 51 mm. Print with 5 wall loops, 15% sparse infill, and The file is optimized for the Bambulab A1, but it can also be printed on other 3D printers
My ear canals are quite large and I notices the bigger types of earfoam are only available for headphones with wider stems. I decided to make shims to make the 5mm earfoams fit on my 3mm SE215 headphones. Because I those headphones for…
This is to mount Pololu wheel https://www.pololu.com/product/980 to ST3215 digital servo https://www.waveshare.com/st3215-servo.htm OnShape model:…
This socket is meant to be mounted to a BOPLA ET-215 enclosure (size 120 x 80 x 57 mm³) for ~18€. It therefore can utilize two of the original mounting holes of the case. The two others need to be drilled, because the holder had to be…
This is an angled antenna mount for the Furibee X215 Pro FPV Racing Drone There are three different versions, depending on what angle you need: Angled_Furibee_X215_FPV_antenna_mount_5.stl (closest to stock mount angle)…
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
I was building the Lego Bugatti 42151 set with my son to discover 3 pieces missing, most likely lost during the build. I designed three parts to replicate the lost pieces: Bracket - A unique T shaped bracket with 2 horizontal holes and 2…
I wanted to have a stand for my Lego Ford GT and the ones I saw I did not like much so I designed my own version
Wall mount bracket for the Lego Technic MT-10 42159 motorcycle. Designed to only use a single screw with a dry wall anchor (sized for #8) Alternative, can be attached directly to a stud with a screw. It would be preferable to not use a…
To construct the case, the battery is placed into the print near the end (at layer 383 when using a 0.2mm layer height), and the print is then resumed, fully encasing the battery. The weight of the print is 6 grams, bringing the combined…
- Importing to printables for old times sake - If anyone still flies these 250 frames in 2023+, please let me know ;) Battery Pad to be printed in soft TPU for the Martian II 215 anniversary FPV Quad Frame Print with low infill (I used…
This is a holder for the Fingerbot to automate powering on the BK215 battery. Print with supports (due to the screws). PLA is fine, but PETG is better. Printable: 1 x Holder 1 x Leg extension Addition needs: • 1x Fingerbot (35 mm x 35 mm)…
My wife bought me a set of these blinkers (https://www.rizoma.com/en/landing-fr130/?cat=44) ~2 years ago and I couldn't find an adaptor for them (even though Rizoma does manufacture one, some places send you the BMW one instead). So I…
This is an arm bumper and soft motor mount for the Furibee X215 Pro FPV Racing Drone I remixed the soft motor mount by @mcooz to add a lip to keep it from coming up during crashes, and to provide a bit of protection to the bottom of the…
Transmission lever for Mercury Marine engine Part Nr.: 42153 i made a 1:1 copie from the original one and a reinforced version for more durability so i hope this never breaks again the 1:1 lever is on the Photos
Just longer version. And second one is with holes.
Martian 215 Rear Stock 20x20 with R-XSR holder. I am using with lost beeper combination. Print instructions Category: R/C Vehicles Summary Martian 215 Rear Stock 20x20 with R-XSR holder. I am using with lost beeper combination.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* A vented funnel optimized for FAST pouring into a 5…
Print upside down! - the triangular part has built-in surfaces for support. You can go to your slicer and paint supports onto these parts. They will break off easily after printing. Note: You will need one M2.5 Skadis T-Nuts by @6d6178…
Halterung für das PB 215/53er System - Steck- Wechselklingen Passend zu: S37x9 und Skadis Lochwände 4 Versionen: PB 215 only Nr. 80 PB 215-System: 2x Handriffe Mittig / 39x Wechselklingen Nr. 81 PB 215-System: 2x Handriffe Mittig / 39x…
Firstly thanks for reading! So I needed a way to differentiate between NFC tags and I wanted something a little nicer than just writing on them. Now in the example below I've just added some simple lettering to make it easier as these are…
Layer - 0.2 mm Support - YES
![Honeycomb thicker outer walls [215x203]](https://media.printables.com/media/prints/580575/images/4635119_1ad4682c-bfab-4777-9b72-abd9570be0cb/honeycomb-walls.png)
![Amiibo NFC215 Card Holder [25x Cards]](https://media.printables.com/media/prints/17893/images/172568_b8cacc45-4e52-41ee-9922-92890853921e/v2_-_example_17893.png)
