SE215 Ear Foam Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shims to make larger earfoams fit on skinny stems
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
My ear canals are quite large and I notices the bigger types of earfoam are only available for headphones with wider stems.
I decided to make shims to make the 5mm earfoams fit on my 3mm SE215 headphones.
Because I those headphones for sleeping and the Bluetooth adapter doesn't lower its volume low enough, I have also included a closed variant, which significantly dampens the sound, but doesn't sound too terrible.
Fot the people where that 2mm is too much (sleeping on their ears), I have included a shortened version, but you will need to take 2mm off your SE215 headphones for it to work.
I strongly recommend printing these in TPU 95A (or another flexible filament), as it latches onto the ridge on the SE215 with a gap on the inside.
(and the edges on the closed variant feel less rough)
UPDATE: Due to the finnicky nature of printing sub-mm holes in TPU, I have given upsizing the tiny hole and succumbed to using a miniature hand drill to get the hole “just the right size” to pass a comfortable amount of sound: https://www.aliexpress.com/item/1005005402307819.html