1 / 1
Vapcell P2150A Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To construct the case, the battery is placed into the print near the end (at layer 383 when using a 0.2mm layer height), and the print is then resumed, fully encasing the battery. The weight of the print is 6 grams, bringing the combined weight of the case and battery to just under 80 grams.
I have added a lightweight version which uses a single wall rather than 2. Its weight is ~3g. It is trickier to print and took me a few tries to get right. It also is slightly taller, so the pause should be at layer 385.
Printed in TPU