1 / 1
Vapcell P2150A Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Vapcell 2150A battery
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 693
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To construct the case, the battery is placed into the print near the end (at layer 383 when using a 0.2mm layer height), and the print is then resumed, fully encasing the battery. The weight of the print is 6 grams, bringing the combined weight of the case and battery to just under 80 grams.
I have added a lightweight version which uses a single wall rather than 2. Its weight is ~3g. It is trickier to print and took me a few tries to get right. It also is slightly taller, so the pause should be at layer 385.
Printed in TPU