Furibee X215 Pro Angled FPV Antenna Mount

This is an angled antenna mount for the Furibee X215 Pro FPV Racing Drone

There are three different versions, depending on what angle you need:

• Angled_Furibee_X215_FPV_antenna_mount_5.stl (closest to stock mount angle)
• Angled_Furibee_X215_FPV_antenna_mount_4.stl (angled more towards straight backwards)

• Angled_Furibee_X215_FPV_antenna_mount_3.stl (angled almost straight backwards)
  I switched to a Mach 2 VTX with MMCX connector, and the SMA pigtail is too long to fit in the stock antenna mount. I just needed a slight angle to get it mounted.

  I was using this one by @goebish, but decided to try making my own version.

  I'm using this FC stack mount for RDQ Mach 2 VTX (slim underslung version) by Wile_E.

  Also using my own remix of the soft motor mount by @mcooz. I added a bottom lip/bumper.

  I damaged a couple of the stock motors, so I swapped them out for the RaceDayQuads Badass 2206 2450kv Naked Bottom Racing Motor.

Print instructions

Category: R/C Vehicles Print Settings

Printer Brand: Monoprice

Printer: Maker Ultimate

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2mm

Infill: 100%

Filament: Inland PLA Black