Furibee X215 Pro Angled FPV Antenna Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an angled antenna mount for the Furibee X215 Pro FPV Racing Drone There are three different versions,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is an angled antenna mount for the Furibee X215 Pro FPV Racing Drone
There are three different versions, depending on what angle you need:
- Angled_Furibee_X215_FPV_antenna_mount_5.stl (closest to stock mount angle)
- Angled_Furibee_X215_FPV_antenna_mount_4.stl (angled more towards straight backwards)
Angled_Furibee_X215_FPV_antenna_mount_3.stl (angled almost straight backwards)
I switched to a Mach 2 VTX with MMCX connector, and the SMA pigtail is too long to fit in the stock antenna mount. I just needed a slight angle to get it mounted.I was using this one by @goebish, but decided to try making my own version.
I'm using this FC stack mount for RDQ Mach 2 VTX (slim underslung version) by Wile_E.
Also using my own remix of the soft motor mount by @mcooz. I added a bottom lip/bumper.
I damaged a couple of the stock motors, so I swapped them out for the RaceDayQuads Badass 2206 2450kv Naked Bottom Racing Motor.
Print instructions
Category: R/C Vehicles Print Settings
Printer Brand: Monoprice
Printer: Maker Ultimate
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm
Infill: 100%
Filament: Inland PLA Black