Waveshare ST3215 Servo Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printable mount that snugly fits Waveshare's ST3215 servo and provides access to both SPI connectors.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 403
- Wydruki
- 0
- Wyświetlenia
- 1821
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Waveshare's ST3215 digital servo has a fairly complex and odd body shape. This model contains a mount that snugly fits the servo's body. The mount has holes matching the eight mounting holes on the servo for use with the self-tapping plastic screws that came with the servo.
I printed this using Fiberlogy's PCTG filament, and I would recommend using a slightly springy, technical filament instead of PLA.
I recommend printing the mount sideways with organic supports for the bridge on the mount's front. If you don't want that bridge, you can just clip it out with a pair of side cutters after printing.
You can either copy the provided STL into one of your models, or you can extend the OpenSCAD script.