Toilet cistern lever arm - 25mm dog leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not a glamorous item but when you need one of these then this might help. Replacement toilet cistern internal lever…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Not a glamorous item but when you need one of these then this might help.
Replacement toilet cistern internal lever arm.
This lever arm's special feature is a 25mm dog leg (switchable left or right) and could also be used for normal mounting (i.e. where a dog leg is not required).
I found some supplied lever bars (square bar connecting the the external flush lever to the internal lever arm) were too short causing miss-alignment and putting strain on the cistern syphon piston.
I created this dog legged lever arm to help correct the alignment and reduce the stress by compensating for a short lever bar.
Print with a 70% or more infill.
Print Settings
Printer:
Qiditech One
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
70
Filament:
ABS / PLA ABS
Category: 3D Printing