1 / 2
Toilet cistern lever arm - 25mm dog leg — image 1
1 / 2

Toilet cistern lever arm - 25mm dog leg

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Not a glamorous item but when you need one of these then this might help. Replacement toilet cistern internal lever…

Rating
0 / 5
Likes
1
Downloads
78
Makes
0
Views
470
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

Not a glamorous item but when you need one of these then this might help.

Replacement toilet cistern internal lever arm.

This lever arm's special feature is a 25mm dog leg (switchable left or right) and could also be used for normal mounting (i.e. where a dog leg is not required).

I found some supplied lever bars (square bar connecting the the external flush lever to the internal lever arm) were too short causing miss-alignment and putting strain on the cistern syphon piston.

I created this dog legged lever arm to help correct the alignment and reduce the stress by compensating for a short lever bar.

Print with a 70% or more infill.

Print Settings

Printer:

Qiditech One

Rafts:

Yes

Supports:

Yes

Resolution:

200

Infill:

70

Filament:

ABS / PLA ABS

Category: 3D Printing

Tags