G9 in E26 slot LED Light Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover designed to fit over G9 sockets fit into a E26 slot.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover designed to fit over G9 sockets fit into a E26 slot. Sized to accommodate LED bulbs that are longer than typical G9 halogen bulbs.
The second photo is the original glass cover that I was replacing, which was designed for the shorter Halogen bulbs. The cover shown in the first photo is a version with a large LED sized gap so that it could fit into the light fixture (with the gap rotated away from where a person can see it.
This is a pretty niche item, but figured I'd post in case others have similar fixtures. I uploaded the versions with and without the gap. Cylinder has .1mm tolerance around the 26mm slot.
WARNING: Do not use PETG or PLA (probably not even ABS) with a real halogen bulb, it will melt and potentially pose a fire hazard. Either use an LED bulb, or use PC Filament.
Print Details:
Material: Transparent PETG (for temperature resistance)
Infill: 50% Adaptive Cubic