Spray Can Straw Holder / Mount - Universal - Magnetic e.g. for WD-40 cans !!<100mm filament!!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
designed as a "Flash Contests Theme: Last Meter" entry it utilizes <10cm of filament. Designed for a D 6mm H 3mm magnet
- Ocena
- 4 / 5
- Polubienia
- 71
- Pobrania
- 188
- Wydruki
- 3
- Wyświetlenia
- 1444
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
As I already have remixed a straw holder which only fits the 150ml and 250ml bottles of WD-40 i was wondering if there is something universal….
…now stumbling across the "Flash Contests Theme: Last Meter" I went for the universal and minimal approach. I still had the 6mm diameter and 3mm high magnets lying around from another project….
….the design can be printed with 100mm (approx 4 inch) of filament. I also tested it with a 0.2mm nozzle and brought it down to 90mm, to be precise: 89,19317mm
End of Skirt:
G1 X100.935 Y99.294 E4.36108
G1 F1500 E2.36108
;MESH:spraycan_straw_clip_holder.stl
End of Print:
;TIME_ELAPSED:327.391588
G1 F1500 E93.55425
M140 S0
I have also included the FreeCAD model and a step file if you want to tune on your own.
Attention: the included gcodes are for:
- CubeAnet 8 (coreXY printer with direct drive and a 200x200 bed running a 0.2mm nozzle) and just for the fun of it
-CR-10s Pro V2 with a BIQU H2 drircet drive running a 0.4mm nozzle….
….and yes, since I was to lazy to search for my PEI bed for this printer and my bed is completely worn down (check out picture), I had to invest 30mm in to a prime line and a brim ;)
….but if someone running a prusa slicer just send me the gcode via PM and I will include it for the Prusa printers