1 / 2
RF Shield for Stratux / GPYes / Geekstory u-blox 8 USB GPS Summitlink V3 Case — zdjęcie 1
1 / 2

RF Shield for Stratux / GPYes / Geekstory u-blox 8 USB GPS Summitlink V3 Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a shield to separate the ADS-B radios from the GPS receiver in a Stratux GPS / ADS-B receiver. These UBlox GPS…

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
378
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is a shield to separate the ADS-B radios from the GPS receiver in a Stratux GPS / ADS-B receiver. These UBlox GPS receivers are fairly well shielded, but I have found that the additional shielding helps a bit. Designed to fit in the upper center USB slot in a Summitlink V3 case. May work in other cases and or with other GPS Receivers

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

100

Filament: Cheap PLA White


Notes:

Any material does the trick.

Post-Printing =============

Cover both sides of shield with adhesive copper foil tape and install USB GPS to hold in place.

How I Designed This

Category: Electronics

Tagi