1 / 2
RF Shield for Stratux / GPYes / Geekstory u-blox 8 USB GPS Summitlink V3 Case — image 1
1 / 2

RF Shield for Stratux / GPYes / Geekstory u-blox 8 USB GPS Summitlink V3 Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a shield to separate the ADS-B radios from the GPS receiver in a Stratux GPS / ADS-B receiver. These UBlox GPS…

Rating
0 / 5
Likes
1
Downloads
23
Makes
0
Views
376
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This is a shield to separate the ADS-B radios from the GPS receiver in a Stratux GPS / ADS-B receiver. These UBlox GPS receivers are fairly well shielded, but I have found that the additional shielding helps a bit. Designed to fit in the upper center USB slot in a Summitlink V3 case. May work in other cases and or with other GPS Receivers

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

100

Filament: Cheap PLA White


Notes:

Any material does the trick.

Post-Printing =============

Cover both sides of shield with adhesive copper foil tape and install USB GPS to hold in place.

How I Designed This

Category: Electronics

Tags