Ikea UPPDATERA tray stacking feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stack UPPDATERA trays with projects for easier storage!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 715
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I found that the Ikea UPPDATERA utensil trays are excellent for keeping (not only) electronics projects organized. They're ideal for breadboard, adapters, parts etc. that go together. One downside of the trays is that they don't stack.
These add-on feet let you stack any number of the trays without messing up breadboard wires or whatever you have inside.
I printed 12 different versions before getting it just right. This is my final revision that works well enough. The feet use just over 1m each with 15% infill.
The top of the model is designed to click onto the tray. The bottom holds in place by hooking onto the rubber pads on the bottom side of the tray. You could also glue it on for a more permanent attachment.
I used PETG, PLA might work but it could crack when installing.