AR900 / RMRC Recruit DJI FPV Air Unit Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Goals were to encourage more airflow with curves, have the Air Unit to be retained with a snap in fit, have more room…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Goals were to encourage more airflow with curves, have the Air Unit to be retained with a snap in fit, have more room for the cables wedged between the camera and unit, and have the camera much closer to the front so that it could be tilted down and still not see the nose cone.
This is adjustable between 0 (horizontal) and 45 degrees down and assumed double-sided tape or Velcro® is holding it in (so that is figured into the height). Inspired by excellent concept design by harkal.
You can purchase this pre-made on a liquid-resin stereo lithography printer from my webstore:
http://www.matter-replicator.com/product/ar900-rmrc-recruit-dji-fpv-air-unit-mount/
Category: R/C Vehicles