1 / 1
Food Saver Vacuum Adaptor for VacMaster VP112S — zdjęcie 1

Food Saver Vacuum Adaptor for VacMaster VP112S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This gives a FoodSaver VP112S a FoodSaver port. You still need the hose. Note that the VP112S will draw an 80% vacuum…

Ocena
0 / 5
Polubienia
1
Pobrania
32
Wydruki
0
Wyświetlenia
262
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This gives a FoodSaver VP112S a FoodSaver port. You still need the hose.

Note that the VP112S will draw an 80% vacuum through this in about 8 seconds, so best to press the stop button after 10 seconds or else you risk cracking some FoodSaver containers. 10 seconds should have no risk, but I cracked one after about 50 seconds.

https://www.youtube.com/edit?o=U&video_id=_oJZaSgCR3k

Note that this is best used with an optional o-ring of size 7/8" ID and 1" OD by 1/16" width. You can buy these at Home Depot. O-ring is not included because ShapeWays just ships the 3D-printed part.

Category: Kitchen & Dining

Tagi