Food Saver Vacuum Adaptor for VacMaster VP112S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This gives a FoodSaver VP112S a FoodSaver port. You still need the hose. Note that the VP112S will draw an 80% vacuum…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This gives a FoodSaver VP112S a FoodSaver port. You still need the hose.
Note that the VP112S will draw an 80% vacuum through this in about 8 seconds, so best to press the stop button after 10 seconds or else you risk cracking some FoodSaver containers. 10 seconds should have no risk, but I cracked one after about 50 seconds.
https://www.youtube.com/edit?o=U&video_id=_oJZaSgCR3k
Note that this is best used with an optional o-ring of size 7/8" ID and 1" OD by 1/16" width. You can buy these at Home Depot. O-ring is not included because ShapeWays just ships the 3D-printed part.
Category: Kitchen & Dining