Behringer UCA222 under table mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Need to get your table surface clean and clutter-free?
Just mount all that USB stuff under the table!
For easier mounting apply some double-sided tape to the holder.
Then do a test fit, and secure with two 3mm screws.
To clear the cable this mount only covers a part of the UCA222 and leaves all connectors etc
accessible.
This model is made with FreeCAD - it is parametric, just change the desired parameters in the “dims” spreadsheet in the spreadsheet workbench.
Print with material of your choice. I used PLA with 0.2mm layer height, 20% infill.
No supports needed, be sure to use a brim for good build plate adhesion!