1 / 2
Behringer UCA222 under table mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Need to get your table surface clean and clutter-free?
Just mount all that USB stuff under the table!
For easier mounting apply some double-sided tape to the holder.
Then do a test fit, and secure with two 3mm screws.
To clear the cable this mount only covers a part of the UCA222 and leaves all connectors etc
accessible.
This model is made with FreeCAD - it is parametric, just change the desired parameters in the “dims” spreadsheet in the spreadsheet workbench.
Print with material of your choice. I used PLA with 0.2mm layer height, 20% infill.
No supports needed, be sure to use a brim for good build plate adhesion!