1 / 3
FIRST Steamworks Gear Peg
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: This has been updated for the new drawing as of 3/2/17. Its file name is peg_point2.0.stl This is the gear peg…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
NOTE: This has been updated for the new drawing as of 3/2/17. Its file name is peg_point2.0.stl
This is the gear peg from FIRST Steamworks, made using the drawings provided by FIRST.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn't Matter
Supports:
No
Infill:
30%
Notes:
You'll need to turn it 90 degrees on the X axis to make it print flat. Inventor didn't make the bottom of the part the bottom of the STL like I expected.
You also should be mindful of how thick the top/bottom are. I've had them split out while screwing the peg in.Category: Replacement Parts