3D projection of 120-cell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a model I constructed of a 3D projection of a 4D shape called the 120-cell among other names. Learn more about…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a model I constructed of a 3D projection of a 4D shape called the 120-cell among other names. Learn more about it here: https://en.wikipedia.org/wiki/120-cell
Also check out some videos on Youtube. Search Youtube for "120 cell" and see if you can understand how this is a 3D projection of that 4D object... Good luck!
I'm still learning how to use the tools to generate better and more printable stl files but if you do print this, use a wide brim at a minimum and scale it up as needed or run it through a tool like Blender to thicken it. You may need additional support also depending on your bed adhesion (I used an 86% overhang angle touching the bedplate only). You will most likely want to scale the smaller model up by 200% or 300% or more in the slicer because it is very thin at the current scale (too thin really to be successful with a 0.4mm nozzle). The inside of the struts may be hollow so I'm still thinking about how to solve that issue to make them solid. I will likely be replacing these stl files as I figure out how to improve them.
Have fun!
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
100%
Filament: eSun PLA+ PLA+
Category: Math