Liczymy pasujące modele…
This is a simple wall bracket for the TP-Link Deco M4 / AC1200 Mesh APs. Very simple to print, mountable with 2 screws. Just plug the AP in the bracket, no additional screws, glue or ribbons. It has a open bottom for air circulation and…
I previously designed a window mount for the Eufy camera. As I've switched to a TP-Link Tapo C120 camera, I'd like to share this window mount option for those who need it. It uses the 3M Command Picture Hanging Strips (Medium) found here.…
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
To address sunlight affecting my TP-Link C120 camera at certain times, I designed a slide-on sun visor. Product: TP-Link Tapo C120 here: (#ad) https://amzn.to/3JHfkOp Filename: 1 x TP-Link_Tapo_C120_Sun_Visor.stl Print Settings:…
This is a “wall wart” style mount for a Tapo C120 camera . These cameras offer a good bang for the buck, but the stock magnetic mount seems a bit lightweight. I needed to mount several of them outside, and felt the need for a more robust…
Pretty basic edits to the original model to hollow the interior and add pass thru cutouts for the cable.
I wanted to be able to hide my wifi router, but not contain it within a cabinet. This mount, that fits with the native hanging mount on the router, allows me to hang the router anywhere with the help of just a couple of command strips.…
A mount for the Tapo C120 camera that can use command strips to mount just about anywhere. The fit is tight, so the magnets may not be necessary in most mounting positions. Magnets (optional) 2x 15mm x 3mm.
Tp-link AC1200 Router mount screw version to screw onto something Distance between holes is 52mm
Centauri Carbon door mount for TP-Link Tapo C120/C121 camera. First attempt, there's some geometry I'd like to tweak and will maybe adjust the angle in a second version / make the cone flare out so the image isn't cropped on the right.…
This simple mount was created to hold the eufy indoor cam C120. The base of the cam can slide in the slot and the mount can then be clipped onto a rod (e.g. a rod of a lamp post). The diameter of the clamp can be easily changed to fit…
Arm zur Befestigung einer Eufy-Camera. Entweder mit Löcher für eine Schraubbefestigung (Damit sollten sich auch Befestigungsplatten anderer Hersteller anbringen lassen), oder mit Noppen die exakt für Eufy Cameras passen. Die Befestigung…
Tp-link AC1200 Router mount to stick somewhere with double sided tape
This is a plate with two mounting posts to connect to the bottom of your eufycam. This plate allows for using VHB tape or another adhesive on the underside of the plate. This will allow you to remove the camera while leaving the mount in…
It has been a while but I think I printed it with the visor/front screw portion down and used supports for the portion of the body which doesn't touch the build plate. The camera must be inserted before mounting (as I mentioned, lots of…
Simple camera holder for Tapo C120. Fastened with screws into the original holes. Fasteners: 2x screw M3x6 (I used ISO 7380-1 with TORX) 2x nut M3, DIN 934 I printed on PRUSA XL with original ENCLOSURE: Filament: AURAPOL ASA 3D Filament…
I took the design @FredinHouston_14062 made and adapted it for use on the Litter Robot.
Xiaomi Mash System AC1200 WiFi Hotspot Wall Mount PETG
Adventurer 5M camera mount - fit Eufy indoor camera C120 2K which is cheap and great quality camera. This will not work if you have a door installed as it will block it from opening / closing. 0.4mm nozzle size 0.2 layer height 15% fill…
Děti dokážou otevřít téměř vše. Dětská pojistka ABUS JC1200A JONAS je sice dobrá, ale má jeden malý nedostatek. S tímto vylepšením můžete tento nedostatek odstranit a uzamknout místa která chcete ochránit před dětmi. Používání tohoto…
Wall mount for the tube from iiglo IIAC12000W aircondition Mount the wall mount and screw in the pipe. Use organic tree support - print in PETG cause moist air … you know
Made a mount for Tapo C120 camera for the Snapmaker U1. Printed with PLA and fits nice. Ignore the terrible camera screenshot because I didn't adjust the camera focus yet. I ended up printing it the same way in the 3mf file and added…
Print upside down without support. (6-8-2025) Added naked model to reduce heat for AX1800.
Tp-link AC1200 Router mount flat head screw version to mount onto something distance between holes is 52mm
Wall Mount for TP-Link Tapo C120
This is a mount for the Tapo C120 camera that utilizes the pill-shaped hole on the top-right corner of the Bambu P1P printers. It acts as a complement to the built-in camera, providing much higher frame-rates. IMPORTANT: This uses a “snap…
A wall mount for the wifi security camera Tapo C120. The model is made to be placed in a wall corner and is angled 8 degrees down to get a better view over the area. The model consists of two parts, a wall mount and a camera holder. The…
Mashed these three together with a few small adjustments to mount my Eufy C120 camera to my white skadis board and make it less obvious to slightly protect it from being immediately disabled in case of break in. This is made for upright…
The AC1200M is a nice cheap 5Ghz router but it gets very hot and slow. So this is the solution. Print instructions I added a thin plate of aluminium to help the heat diffusion and some heatsinks designed for Raspberry Pi chips. The fan is…
A mount for 3030 extrusion and the TP-Link Tapo C120 camera.
A (remixed) case for the CC1200 M17 Rev B Hotspot: https://rz01.org/cc1200/
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…
The camera inside the printer is almost useless, focus is lacking and light causes the background to over darken and you can not see anything. I created this mount for my Eufy C120 based on measurement listed online The mount uses the…
The mass produced wifi router AC1200 or C6 in revision 4 from tp-link comes with many accessories, except a wallmount or a template that helps drilling the needed holes without wasting time for making a sketch on the wall. (I will later…
The Dexter Cordless Drill IC120CD only works with batteries. This 3D-printable adapter, combined with an AC power adapter, allows you to also use this drill without battery, for example if your batteries are out-of-power. This adapter has…
A shelf to hold a Tripp Lite LC1200, 1200W 120V Line Conditioner. It should also fit similar models. I wanted something to hold the LC1200 under my desk. There is only one bracket model file, but you need to print two. I mirrored a second…
Enhance your remote print monitoring setup with this clean, custom-designed camera mount for the Snapmaker U1 , specifically engineered to hold the TP-Link Tapo C120 smart security camera. This low-profile holder sits flush on the corner…
Needed cover for NETGEAR - AC1200 wifi extender to be run outside and still be ventilated and also covered from insects, so there we are.
Design Features Clearance: Attachment flanges were shortened to avoid covering the Z-axis roller bolts . Left-Side Optimization: added a deeper version designed to mount on the left Z-axis extrusion, with cutouts for stepper motor bolts .…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement end-cap style stand that…
I picked up these TP-Link Deco-W2400 AC1200 wireless mesh devices to extend my WiFi into the garage and realized that I needed a wall mount. There are several that can be downloaded, but none of them worked particularly well for me. The…
The volume knob on my alarm clock got damaged and I model a replacement part for it. It's splitted in 2 parts. One for the axis/pin that gets in the potentiometer and one for the knob.
This replaces the rubber feet on the HPC1200CMB Blitz. Printed in TPU90A with 15% infill. Use a washer between the screw head and the TPU when mounting.
Lo he dibujado para tomarlo como referencia para crear mi propia caja de filtración HEPA. Las cotas son bastante fieles, si detectas algún error, no dudes en decirlo. Actualización 26/09/2026 - Añadido soportes de rodete - Re-dibujar…
This is a “wall wart” style mount for a Tapo C120 camera . These cameras offer a good bang for the buck, but the stock magnetic mount seems a bit lightweight. I needed to mount several of them outside, and felt the need for a more robust…
A mount for the Tapo C120 camera that can use command strips to mount just about anywhere. The fit is tight, so the magnets may not be necessary in most mounting positions. Magnets (optional) 2x 15mm x 3mm.
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
Made a mount for Tapo C120 camera for the Snapmaker U1. Printed with PLA and fits nice. Ignore the terrible camera screenshot because I didn't adjust the camera focus yet. I ended up printing it the same way in the 3mf file and added…
I took the design @FredinHouston_14062 made and adapted it for use on the Litter Robot.
A Tapo C120/C121 mount for the X motor plate of your A1 that puts the camera in a good position to view the nozzle of the printer. Uses provided screws and nut from the Tapo C120 arm to connect parts together. Exploded view for assembly…
This is a simple stand for the TP-Link AC1200 Range Extender if you're not mounted on the wall plug and using an extension cord. It should also work for the AC750 version too as it looks to be the same style, but since I don't have one, I…
Wall cradle mount for your TP Link Deco units. Category: Computer
