1 / 4
Diaqua / Laufen Toiletseat Adapter / Holder — zdjęcie 1
1 / 4

Diaqua / Laufen Toiletseat Adapter / Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toiletseat Adapter Diaqua on Laufen Toilet with softclose and snap on - off function.

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I bought a new toiletseat of the brand Diaqua. Due to the special softclose function an the snap on - off feature, this seat seems to have another dimension for the Holder beside the other Diaqua Products. Probably still buyable but it was not available at my market.

Therefore i designed this modified adapter to fit my new toiletseat.

The distance of the Seatholes is adjustable by turning or moving the Adapters in the Slot.
 

Measurements and calculations:


Pin Diameter - 10mm
Pinheight - 29.5mm
Size betweend Toiletseat and Toilet - 8mm
Squareneck screw to fix holder to Toilet - 6mm neck - M6
 

Added features:


Two O-Rings on the Hole Adapter for a nice fit. (Size (mm) 6.07 x 1.78)
One O-Ring underneath to prevent sliding. (Size (mm) 26.58 x 3.53) 
One Screw inside the Hole Adapter to prevent breaking and add rigidity. (M4 x 24mm)

 

Print Details:

Printed in white PETG to match seatcolor and give enough materialstrength.
Infill 100%, 2 Perimeters, layerheight 0.15 quality, enabled supports underneath Screwhole.

Printtime was arround 1.5h for 1 piece.

 

Foto description:

Second Foto is the Original holder with the wrong dimensions. (8mm Pin, Pinheight 38mm, distance Toiletseat - Toilet 9.65mm.)

Third - Fourth Picture, side by side comparison.

 

If you're in need for a adapter with some other dimensions feel free to ask me to modify. :)

Happy printing!

Tagi