2D - MatePlotter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project with the goal to enable beginners to program a simple CNC-System.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
MatePlotter
This is a work in progress project. The models are currently tested and will be updated, along with arduino sample code.
What to expect
This is a 2D Plotter for mate glass bottles, that uses the very common 28BYJ steppers. The goal of this project is to give programming beginners a fund and practical exercise, by writing code for microcontrollers to draw shapes and sketches onto the bottle.
How to use
The MatePlotter uses a common GT2 belt and 8mm round aluminium rods. Pulley and idler for the belt assembly are printed. You should be able to assemble everything with only M3 and M4 bolts and nuts. The 28BYJ steppers are mounted inside the base to actuate the turntable and the pulley. To use the MatePlotter you insert a standard 0.5L glass bottle and put a pen into the carriage.
Resources
Simple Stepper Library to use with a ESP32 and MicroPython:
- https://gitlab.com/ddi-tu-dresden/eduinf/micropython/mateplotter