Breadboard Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounts between two sections of solderless breadboard to allow using carrier boards or modules with a wide row…
- Ocena
- 3,8 / 5
- Polubienia
- 47
- Pobrania
- 288
- Wydruki
- 5
- Wyświetlenia
- 1422
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This mounts between two sections of solderless breadboard to allow using carrier boards or modules with a wide row spacing, for example an ESP32 module.
Includes dovetail slots/pegs to fit the solderless breadboards I have
(should be standard, but I include the FreeCAD file if you need to re-design).
I used PLA at 205C/55C, 0.2mm layer height, 1.2mm walls, 0.8mm top/bottom, 20% infill with a 0.4mm nozzle.
Inspired by Hackaday article "The Solution To Oversized Dev Boards: A Literal Hack" https://hackaday.com/2018/08/27/the-solution-to-oversized-dev-boards-a-literal-hack/
Designed in FreeCAD 0.17, sliced in Cura 3.4.1, printed on a Prusa clone using OctpPi
Category: Electronics