Breadboard Divider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mounts between two sections of solderless breadboard to allow using carrier boards or modules with a wide row…
- Rating
- 3.8 / 5
- Likes
- 47
- Downloads
- 288
- Makes
- 5
- Views
- 1,422
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This mounts between two sections of solderless breadboard to allow using carrier boards or modules with a wide row spacing, for example an ESP32 module.
Includes dovetail slots/pegs to fit the solderless breadboards I have
(should be standard, but I include the FreeCAD file if you need to re-design).
I used PLA at 205C/55C, 0.2mm layer height, 1.2mm walls, 0.8mm top/bottom, 20% infill with a 0.4mm nozzle.
Inspired by Hackaday article "The Solution To Oversized Dev Boards: A Literal Hack" https://hackaday.com/2018/08/27/the-solution-to-oversized-dev-boards-a-literal-hack/
Designed in FreeCAD 0.17, sliced in Cura 3.4.1, printed on a Prusa clone using OctpPi
Category: Electronics