Yorkshire Rose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been intrigued by the idea of 3D Printed "Stained Glass" for a while, and after LOTS of experimenting I came up…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I've been intrigued by the idea of 3D Printed "Stained Glass" for a while, and after LOTS of experimenting I came up with this.
Yorkshire Rose: Thats where I live ... :-)
The frame is printed in 2 colours, first half in clear then with black for the bits around the colour areas.
When the bits were printed I then glued them into their areas using PVA glue - it dries clear .. but it took around 5 days for it to finally clear.
All Rigid Ink PLA, colours used: Translucent Green, Natural, Pearl, Yellow, Black.
Print instructions
Category: 2D Art Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.15mm
Infill: 25%
Filament: Ridgid Ink PLA Translucent
Notes:
My Prusa Mk3 printed is of the powder coated variety, this gives a pleasant mottled effect to the surface. So when I printed the inserts, I placed them all in the frame upside down, s the mottled bit was showing.
Post-Printing
PVA glue
I used PVA glue spread thinly in the frame, if you're not making the thing see through, then other glue should be fine.