Yorkshire Rose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've been intrigued by the idea of 3D Printed "Stained Glass" for a while, and after LOTS of experimenting I came up…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 73
- Makes
- 0
- Views
- 733
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
I've been intrigued by the idea of 3D Printed "Stained Glass" for a while, and after LOTS of experimenting I came up with this.
Yorkshire Rose: Thats where I live ... :-)
The frame is printed in 2 colours, first half in clear then with black for the bits around the colour areas.
When the bits were printed I then glued them into their areas using PVA glue - it dries clear .. but it took around 5 days for it to finally clear.
All Rigid Ink PLA, colours used: Translucent Green, Natural, Pearl, Yellow, Black.
Print instructions
Category: 2D Art Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.15mm
Infill: 25%
Filament: Ridgid Ink PLA Translucent
Notes:
My Prusa Mk3 printed is of the powder coated variety, this gives a pleasant mottled effect to the surface. So when I printed the inserts, I placed them all in the frame upside down, s the mottled bit was showing.
Post-Printing
PVA glue
I used PVA glue spread thinly in the frame, if you're not making the thing see through, then other glue should be fine.