Toy Garage (Infinitely Expandable)

There are 2 single bay models available and an infinitely expandable version (Print a set of Left and Right sections then as many middle sections as you want to expand it to). All doors and windows open and close. The back can either have a door, window or be solid. The roll door can be swapped for a swing door at any section with the use of the M3 X 30mm set screws in the top piece and 2 M3 X 16mm set screws in the bottom piece. The floor of the garage is a consistent height so cars can go in one door and out any of the others. 

See pictures for instructions. You will need M3 x 35mm bolts, M3 X 16mm bolts, M3 X 30mm set screws and M3 X 16mm set screws. No nuts requires. 

https://www.amazon.com/gp/product/B082TZ1TLL/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1

https://www.amazon.com/uxcell-Hexagon-Socket-Screws-Length/dp/B0143E6SX6/ref=sr_1_23?crid=2J156CRMHXG2X&keywords=m3+x+16&qid=1652923051&s=industrial&sprefix=m3+x+16%2Cindustrial%2C127&sr=1-23

https://www.amazon.com/gp/product/B094JH95DR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

https://www.ebay.com/itm/373491377719

I found it easier to use the following screw drivers to put everything together. You'll need a 1.5mm for set screws and 2.5mm for the bolts

https://www.amazon.com/gp/product/B082TZ1TLL/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1