1 / 4
FLSUN SR Super Racer Wire Cord Plug Protector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to hide wire connections between effector and mobo
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 142
- Wydruki
- 4
- Wyświetlenia
- 1303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (1)Kolekcje (17)Powiązane
As soon as I put my SR together, I immediately pictured something like this to cover up the multi-colored plugs connecting the effector to the mobo. Print two and connect them together with zip ties through the slots.
Someone who is a better modeler than me might want to add some snaps with a very thin hinge to print it as one piece.
I may add a slot for the leveling sensor pigtail, but I just made a small cut with a knife for now.
No supports needed.