YMD09 mount for X52 HOTAS throttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount YMD09 macropad on the throttle on X52 HOTAS (the mounting plate should fit a bunch of other throttles too). I…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Mount YMD09 macropad on the throttle on X52 HOTAS (the mounting plate should fit a bunch of other throttles too).
I used 3 links, you might need a different number. Use M4x16 bolts and M4 nyloc nuts to assemble the whole thing. I used just superglue to attach the mounting plate to the throttle stick but there's holes for M3 bolts if I feel like it (I just don't have short enough bolts at hand
If you need/want to tune some dimension (the exact dimensions of the lasercut frame might vary a bit) the original fusion design is at https://a360.co/3rrr11r
I did this to have some important/useful commands at my fingertips (heh) while keeping Hands On Throttle And Stick while flying in Star Citizen, my keymap is in github
While I standardize in NGen because reasons (I really like it) it shouldn't really matter what filament you use.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.15
Infill:
25%
Filament: ColorFabb NGen PETG Black
Category: Hobby