YMD09 mount for X52 HOTAS throttle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount YMD09 macropad on the throttle on X52 HOTAS (the mounting plate should fit a bunch of other throttles too). I…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 860
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Mount YMD09 macropad on the throttle on X52 HOTAS (the mounting plate should fit a bunch of other throttles too).
I used 3 links, you might need a different number. Use M4x16 bolts and M4 nyloc nuts to assemble the whole thing. I used just superglue to attach the mounting plate to the throttle stick but there's holes for M3 bolts if I feel like it (I just don't have short enough bolts at hand
If you need/want to tune some dimension (the exact dimensions of the lasercut frame might vary a bit) the original fusion design is at https://a360.co/3rrr11r
I did this to have some important/useful commands at my fingertips (heh) while keeping Hands On Throttle And Stick while flying in Star Citizen, my keymap is in github
While I standardize in NGen because reasons (I really like it) it shouldn't really matter what filament you use.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.15
Infill:
25%
Filament: ColorFabb NGen PETG Black
Category: Hobby