Upgrade keys for Abyss boardgame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 328
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would upgrade the keys from the cardboard chits to 3d objects. My wife drew the 3 level STL this came from and then I made the 3d file from that.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
100%
Notes:
The first layer of this is really thin, so I would pay attention to your setting for initial layer height. I have mine set to 0.3mm for this so that way it gets a few passes before moving up.
Post-Printing
I printed this with ABS and used ABS slurry to glue them together so I was not really that concerned with possible holes in the print on the first layer. The slurry would get into it and fill them.
I am going to spraypaint them silver, I think they will look very nice once I do that. I am also considering acetone smoothing as an experiment.
Category: Games