Upgrade keys for Abyss boardgame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 28
- Makes
- 1
- Views
- 328
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would upgrade the keys from the cardboard chits to 3d objects. My wife drew the 3 level STL this came from and then I made the 3d file from that.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
100%
Notes:
The first layer of this is really thin, so I would pay attention to your setting for initial layer height. I have mine set to 0.3mm for this so that way it gets a few passes before moving up.
Post-Printing
I printed this with ABS and used ABS slurry to glue them together so I was not really that concerned with possible holes in the print on the first layer. The slurry would get into it and fill them.
I am going to spraypaint them silver, I think they will look very nice once I do that. I am also considering acetone smoothing as an experiment.
Category: Games