Ender 3 V2 Display Mount for Lack Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for the Ender 3 V2 display so you can put the display outside of your lack enclosure.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
With this model you can have your display outside of the hot enclosure, this has two benefits. Firstly, the display is not exposed to the heat inside the enclosure and secondly, you don't have to open the enclosure when you want to tune something using the display.
The holes are countersunk.
If you want to print the slide-on knob for the display, check out this model:
https://www.printables.com/model/94718-ender-3-v2-display-knob-cap-prusa-style
The original design of the display mount is made by user fabio944 on thingiverse.
Keep in mind that you will have to find a way to route the display cable outside.
Also keep in mind that lack tables are hollow inside, so don't overtighten the screws.