Anet A8 30A (360watt) PSU Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anet A8 comes standard with 20A (240watt) PSU. Upon the stock PSU dying, a 30A (360watt) PSU was purchased to replace:…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Anet A8 comes standard with 20A (240watt) PSU. Upon the stock PSU dying, a 30A (360watt) PSU was purchased to replace: https://www.amazon.com/gp/product/B00D7CWSCG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
30A PSU does not fit stock frame holes, so a mounting frame was created. Also, had to remix/redesign the switch cover. I took a preexisting cover design (https://www.thingiverse.com/thing:2320216) and modeled it to fit the PSU above.
Additional Frame Components:
3 - M3 nuts - press fit into frame first
4 - M3x8mm SHCS - Mounts frame to PSU
3 - M3x16mm SHCS or Phillips screws Mounts Frame/PSU combo to Anet Frame
Additional Switch Cover Components:
2 - M4x8mm Screws to mount cover to side of PSU
1 - switch assembly: https://www.amazon.com/gp/product/B00ME5YAPK/ref=oh_aui_detailpage_o08_s02?ie=UTF8&psc=1
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% Zig-Zag
Notes:
Layer Height: 0.2mm
Wall Line Count: 3
Printed in PLA
How I Designed This
Designed in PTC Creo 4.0.
3aug2018:
Frame Rev 2 - Modified M3 nut to be 5.6mm across for 5.43mm stainless steel nut. Have not tested for press-fit or slip-fit tolerances yet.
30june2018:
Frame Rev 1 - Corrected M3 nut bosses to be 6-sided.
Cover Rev 0 - Original design was from 20 watt PSU. Updated model to fit 30 watt PSU
Category: 3D Printer Accessories