Anet A8 30A (360watt) PSU Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Anet A8 comes standard with 20A (240watt) PSU. Upon the stock PSU dying, a 30A (360watt) PSU was purchased to replace:…
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 1
- Views
- 304
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Anet A8 comes standard with 20A (240watt) PSU. Upon the stock PSU dying, a 30A (360watt) PSU was purchased to replace: https://www.amazon.com/gp/product/B00D7CWSCG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
30A PSU does not fit stock frame holes, so a mounting frame was created. Also, had to remix/redesign the switch cover. I took a preexisting cover design (https://www.thingiverse.com/thing:2320216) and modeled it to fit the PSU above.
Additional Frame Components:
3 - M3 nuts - press fit into frame first
4 - M3x8mm SHCS - Mounts frame to PSU
3 - M3x16mm SHCS or Phillips screws Mounts Frame/PSU combo to Anet Frame
Additional Switch Cover Components:
2 - M4x8mm Screws to mount cover to side of PSU
1 - switch assembly: https://www.amazon.com/gp/product/B00ME5YAPK/ref=oh_aui_detailpage_o08_s02?ie=UTF8&psc=1
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% Zig-Zag
Notes:
Layer Height: 0.2mm
Wall Line Count: 3
Printed in PLA
How I Designed This
Designed in PTC Creo 4.0.
3aug2018:
Frame Rev 2 - Modified M3 nut to be 5.6mm across for 5.43mm stainless steel nut. Have not tested for press-fit or slip-fit tolerances yet.
30june2018:
Frame Rev 1 - Corrected M3 nut bosses to be 6-sided.
Cover Rev 0 - Original design was from 20 watt PSU. Updated model to fit 30 watt PSU
Category: 3D Printer Accessories