RunCamHD sunshade - square
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
••Hexversion1 MUST BE SCALED 0.2!!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
••Hexversion1 MUST BE SCALED 0.2!!!••
••CorrectSize "should" be correct and not needing any resizing••
Can't get hexagon to export to proper scale for some reason.
RuncamHD sunshade. little better shape and design than the Large round I had done before.
saves from sun wash from the side in video when flying with the camera. Also will protect camera lens to some degree in a crash. Also great as a stand :)
Flex/tough print recommended.
(not sure if it'll fit a Mobius? lens circle is 18mm if you want to try.)
Printed on M3D printer, Octoprint/M3Dfio software
100% fill - no support- no raft - High Quality - Again, have to scale to 0.2%
Print instructions
Unassociated tags: Camera stand, Lens Protection, Radio control video
Category: Camera