1 / 2
Toyota (and other) jack and jack stand pads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are pads for safely jacking up Toyota's and other cars with welds underneath.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 217
- Wydruki
- 0
- Wyświetlenia
- 1142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (41)Powiązane
The adapter is made for a 2,5T jack, but they are not standard, unfortunately. Mine has an inner screw of radius 25mm, an inner radius is 49mm, and about 11m of depth. The jack stand pad has dimensions in the picture, the curve is 43mm wide and 9mm deep, and the whole jack pad is 60mm long and 30mm wide (see the picture). It must be quite strong for Your safety so tune your slicer as high as You can, I am not responsible for any damage!